596816
Instant Hot Water Recirculation System Sensor Valve Kit, Size 1/2 inch (15mm)
Sensor Valve Kit for Hot Water Recirculation System used on branched hot water lines coming from the water heater. Kit comes complete with one sensor valve, two 12-inch supply lines with adapter fittings and mounting screws.
This sensor valve kit (sku #0955801) must be used in conjunction with hot water recirculating system, model numbers 500800, 500803 or HWRS-WH. It is designed for a branched hot water line to ensure hot water gets to all areas of the home. Not to be used with a dedicated return line to the water heater.
Features
- Includes two 12 IN supply line, two reducing fittings from 1/2 IN FTP to 3/8 IN MPT and two mounting screws
- Must be used in conjunction with Watts hot water recirculation systems, models 500800, 500803 and HWRS-WH
- Can also be installed parallel to existing sensor valves to increase the speed water recirculation
- A kit may be needed for each hot water loop, valve should be located at the faucet furthest from the water heater in each loop
- UPC (Uniform Plumbing Code) listed
Literature
Approval/Certification Information
For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:
| ASSE | CSA | FM Approvals | NSF |
| UL | ULC | USC | WQA |