Trap Doors Type H-20
Trap Doors - Type JH-20 Wheel Loading Hinged Cover
Type JH-20 Trap Doors - Wheel Loading Hinged Cover is steel construction, single or double leaf design, with wheel loading reinforcing and engineered lift assist for controlled cover operation. Cover is 1/4 inch steel diamond patterned plate. Lifting mechanism is compression spring operation providing controlled opening operation and checking downward motion when closing. A Hold-open arm automatically locks the cover in the open position. Hinges are heavy forged brass with Type 16 stainless steel pins. Finished in red oxide primer. Available in four frame opening dimensions.
Features
- Steel construction in single or double leaf design
- Features wheel loading reinforcing
- Controlled opening operation and checking downward closing motion
- Available in four frame opening dimensions
Literature
-
- Installation Instructions - Trap Doors Type K,Trap Doors Type J,Trap Doors Type H-20
- Installation Instructions - Trap Doors Type K,Trap Doors Type J,Trap Doors Type H-20 - French
- Installation Instructions - Trap Doors Type K,Trap Doors Type J,Trap Doors Type H-20 - Spanish
- Specification Sheet - Trap Doors Type H-20
Approval/Certification Information
For product-specific approval information, please refer to the product’s specification sheet (see literature section above) or ask a Watts representative. For general information regarding any approval certification partners identified in the specification sheet, please visit our certification partners’ websites:
| ASSE | CSA | FM Approvals | NSF |
| UL | ULC | USC | WQA |